Beckett AFG Model B2007 Oil Burner Chasis With 7505B1500U Genisys Control

Description

Product Features:
Note: This product is an AFG Chassis w/ GeniSys Burner control, PSC Motor, Beckett Ignitor, and Single Stage Beckett Cleanout Pump.
Air Tubes (different lengths), End Cones (Firing Rates) and Oil Nozzles are sold separately.
Static Pressure Capability: Enhanced - Medium Range
Blower Wheel: Special tablock
Inlet Airflow: Special airguide
UL Air Tuve Combinations: "F" or "M" Series
Igniter Gaskets Baseplate/Barrier: Required , always specified
Low Firing Rate Baffle: Required, per specification
Capacities:
0.40 to 3.00 gph
56,000 to 420,000 BTU/hr input
Fuels
No. 1 or No. 2 heating oil (ASTM D396) only
Dimensions (standard)
Height: 11-1/2"
Width: 12-7/8"
Depth: 6-9/16"
Electrical Characteristics
Motor: 3450 rpm, NEMA M-flange, manual reset overload protection
Power Supply: 120 V./60Hz./1 phase
Ignition: 10,000 V./23 ma. secondary, continuous duty shielded transformer
Operating Load: 5.8 amps (maximum)
Alternated Voltages or Frequency: Consult Customer Service
Fuel Unit
Single stage
Chassis Features
Nozzle Line Electrode Assembly: Self-centering, delivers oil to the nozzle, high voltage electricity to the electrodes; static plate controls and evens out air flow to the head for smooth, efficient combustion.
Flame Retention Head: One-piece flame retention burner head. Highly stable and intense combustion increases efficiency by as much as 35 percent.
Drive Motor: Continuous duty, split phase motor, built for daily hard use and years of trouble-free operation. Overload protection included.
Blower Wheel: New design provides high static pressure combustion air smoothest starts and combustion under poor draft conditions. Riveted wheel construction for high strength.
Air Guide: Channels combustion air with exeptional uniformity. Evenly distributes air through blower wheel.